Search
Cart is empty

Power Queen 24V 200Ah LiFePO4 battery with 200A BMS

  • Uses an innovative multi-cell configuration with a total of 16 cells. Enables the most even current distribution, maximizing performance and lifespan while providing the highest energy density and safety.
  • EV Class A battery cells according to the strictest European standard with a 5-year guarantee. 4000-15000 cycles for a service life of 10 years.
  • With a total output power of up to 5120W and built-in BMS multi-protection algorithms, it can power multiple devices at the same time and effectively prevent overheating, overcurrent problems and more.
  • Supports solar power storage systems up to a maximum configuration of 4P2S with a capacity of up to 40.96 kWh, completely avoiding power shortages.
  • Saves installation space and wiring costs (compared to 4x12V 100Ah LiFePO4 batteries or 4x12V 200Ah lead-acid batteries)

1,179.99

Description

  • LiFePO4 24V 200Ah (5120Wh) >AGM 4 x 12V 200Ah (2P2S) (4800Wh)

    Installation is simplified by using a 24V 200Ah LiFePO4 battery and requires 50% less wiring.

    A 24-volt battery takes up less space than four 12-volt batteries. This is particularly practical when space is limited.

    Batteries designed specifically for 24V systems can be more efficient than four 12V batteries connected together.

    The fewer batteries connected in series or parallel, the lower the risk of imbalance and the more consistent the performance.

  • Off-grid solar systems with a maximum of 40.96 kWh energy extension (4P2S)

    Power Queen 24V 200Ah solar batteries can be connected up to 4 in parallel and 2 in series to increase the capacity (200Ah, 400Ah, 600Ah, max. 800Ah) and voltage (25.6V, max. 51.2V). With up to 8 batteries, a 51.2V 800Ah battery system with 40.96kWh of energy can be generated.

    This powerful storage solution is suitable for solar systems at home, emergency power supply and for traveling in a motorhome. With the off-grid system, you can live self-sufficiently and in an environmentally friendly way. Compared to mains power, you can save up to 50% on energy costs. (No more than 0.3 euros per kWh)

Automotive-grade cells for safe use

The battery is equipped with a built-in 200A BMS that protects against overcharge, overdischarge, overcurrent, overtemperature and short circuit. It is made of 16 automotive-grade cells and is high density, stable, safe for daily use and environmentally friendly. Multi-cell configurations are crucial for high capacity batteries and the Power Queen far surpasses the 24V 200Ah batteries on the market with only 6 or 8 cells.

Compared to lead-acid batteries, the Power Queen 24V 200Ah is charged faster with the maximum power of the MPPT solar charge controller and is not limited by the internal resistance of the battery even in low sunlight in winter.

Supports 3 charging methods

  • 29.2V 40A (20A) LiFePO4 charger
  • solar module with LiFePO4-capable charge controller
  • Alternator with DC-DC charger 29.2V 40A

Cell type: LiFePO4 Prismatic

Cycle life: 4000-15,000 cycles

Nominal voltage: 25.6V

Nominal capacity: 200Ah

Energy: 5120Wh

Max. extension (series & parallel): 2S4P

Internal resistance: ≤40mΩ

Certifications: CE, RoHS, BattG2, WEEE, VerpackG, UN38.3

Max. Continuous Output Power: 5120W

BMS: 200A

Max. Continuous charging current: 200A

Max. Continuous Discharge Current: 200A

Max. discharge current 5 seconds: 400A

Charging voltage: 28.8V ± 0.4V

Recommended charging current: 40A (0.2C)

Operating temperature: 0°C – 50°C / 32°F – 122°F

Discharge temperature: -20°C – 60°C / -4°F – 140°F

Temperature : -10°C – 50°C / 14°F – 122°F

Connection terminals: M8 screws

Size: L52.0*W26.9*H22.0 CM

Housing material: ABS (flame-retardant plastic)

Protection class: IP65

Shopping Basket